STEEL CORD
.jpg)
.jpg)
.jpg)
.jpg)
Special Purpose Conveyor Belt
PIPE CONVEYOR BELT (India's Biggest Producer)
.jpg)
Pipe Conveyor Belts are used where bulk materials have to be conveyed along horizontal and vertical curves in restricted spaces. Pipe conveyor belts have special capability of adapting to topography, allows material to be conveyed through difficult terrain and over long distances.Belt conveyors have been used for over 150 years. The concept of conveying bulk solid materials by belt, however, has not really changed.
Pipe conveyor is an up-to-date and epoch making transportation system that has solved many problems, such as cargo spills, scattering, leakage and mixing with foreign materials, limited angle of inclination, etc., encountered in the conventional conveyor system.
Pipe conveyor belts major advantages are protection of the transported material from climatological influences like rain and wind as well as protection of the sacred environment by restricting harmful discharge of the transported material such as ash from power stations. Also Inclined angles of up to 35° can be easily overcome by using PIPE Conveyor Belts®.
Effective Cost reductions are possible by shortening the conveyor route and avoiding too many transfer stations
CONVEYOR BELT DESIGN AND CONSTRUCTION
Conventional Conveyor BeltConventional conveyor belting has developed over the years and today operates at tensions as high as 1000 kN/m (or N/mm) width. Their construction can be full fabric (Cotton, N/N, EP), steel cable or steel matrix, a combination of the steel and fabric, or even a monoply fabric construction. Multiply carcass sections are shown in figure.
FEATURES OF PIPE CONVEYOR BELT
There is no scattering, leakage and dropping of materials. Because materials are wrapped up in pipe, this belt prevents cargo spills, scattering, dropping, Leakage, wetting and mixing with dust or foreign materials.It prevents deposit on belt from dropping. Forming return belt into pipe prevents dropping of materials attached to the carrying side. It is capable of transporting on curves. For curved and bending transportation line which usually needs a large space, it reduces layout space a great deal.The belt can be bent freely making transshipments unnecessary.The conveyor length becomes shorter. Since the pipe shape increases friction between material and inside of belt, angle of inclination can be made larger than conventional ones. Further, with addition of fins the angles can be made steep, enabling the conveyor length to be shorter, thereby lowering cost.Thereby it can lower cost.
